安装和配置OPENSSH

发布时间:2022-05-03 发布网站:脚本宝典
脚本宝典收集整理的这篇文章主要介绍了安装和配置OPENSSH脚本宝典觉得挺不错的,现在分享给大家,也给大家做个参考。

OPENSSH的安装和配置
一、 概述
传统的远程网络访问服务在本质上都是不安全的,因为它们在网络上用明文传送口令和数据,很容易被截获,其安全验证方式也容受到中间人的攻击。通过使用OPENSSH,你可以把所有传输的数据进行加密。
SSH是由客户端和服务端的软件组成的,有两个不兼容的版本分别是:1.x和2.x。它需要不同的客户端。OPENSSH同时支持SSh1和SSH2。
二、 OPENSSH的安全验证方式
OPENSSH提供两种级别的验证方式:
1、 基于口令的安全验证:只要你知道服务器上的帐号和口令,那么你可以登录到远程主机上。口令和数据在传输过程中都会被加密。
2、 基于密钥的安全验证:采用此方式验证你必须在远程服务器上为自己创建一对密钥(不对称密钥对),把公有密钥放在远程服务器上自己的宿主目录中。而私有密钥则由自己保存。
三、 所需软件
openssl-0.9.5a.tar.gz 下载网址:http://www.openssl.org
openssh-2.5.2p2.tar.gz 下载网址:http://www.openssh.org
四、 安装步骤
下面的安装选项根据你自己的情况可适当调整,如果有不明白的地方可以参考README、INSTALL文档。此文环境假定所有文件都在/VAR/tmp下:
4. 1安装OPENSSL
[root@mail tmp]tar xzpf openssl-0.9.5a.tar.gz
[root@mail tmp]cd openssl-0.9.5a
[root@mail openssl-0.9.5a]./config –t
[root@mail openssl-0.9.5a]./config --PRefix=/usr --openssldir=/etc/ssl
编辑Makefile.ssl文件更改MANDIR=$OPENSSL/man为MANDIR=/usr/man。
[root@mail openssl-0.9.5a]make
[root@mail openssl-0.9.5a]make test
[root@mail openssl-0.9.5a]make install
[root@mail openssl-0.9.5a]cd ..
[root@mail tmp]rm –rf openssl*
4.2 安装OPENSSH
安装OPENSSL之前确认你的系统中已安装了zlib库,可用下面的命令来检查一下,若没有不要的犹豫,它就在你的系统安装光盘中,马上安装吧!
[root@mail tmp]rpm –qi zlib
[root@mail tmp]tar xzpf openssh-2.5.2p2.tar.gz
[root@mail openssh-2.5.2p2]./configure \
>--prefix=/usr \
>--Sysconfdir=/etc/ssh \
>--wITh-tcp-wrappers \
>--with-ipv4-default \
>--with-ssl-dir=/usr/include/openssl
[root@mail openssh-2.5.2p2]make
[root@mail openssh-2.5.2p2]make install
[root@mail openssh-2.5.2p2]install –m 644 contrib/redhat/sshd.PAM \
/etc/pam.d/sshd
[root@mail openssh-2.5.2p2]cd ..
[root@mail tmp]rm –rf openssh*
五、 配置OPENSSH
5.1 在inetd服务器中起动SSHD守护程序只需加入下面一行(建议在起动TELNET守护程序这一行更改,以完全代替TELNET):
ssh stream tcp nowait root /usr/sbin/tcpd sshd –I
5.2 SSH客户端配置文件/etc/ssh/ssh_config,一般情况下我们在多使用WINDOWS平台的客户端,此配置文件只有客户端不指定任何参数的情况下才使用,其内容如下:
# $openbsd: ssh_config,v 1.9 2001/03/10 12:53:51 deraadt Exp $
Host *
ForwardAgent no
ForwardX11 no
RhostsAuthentication no
RhostsRSAAuthentication yes
RSAAuthentication yes
PasswordAuthentication no
FallBackToRsh no
UseRsh no
BatchMode no
CheckHostIP yes
StrictHostKeyChecking yes
IdentityFile ~/.ssh/identity
IdentityFile ~/.ssh/id_dsa
IdentityFile ~/.ssh/id_rsa1
IdentityFile ~/.ssh/id_rsa2
Port 22
Protocol 2,1
Cipher blowFish
EscapeChar ~

5.3 SSH服务器端配置文件/etc/ssh/sshd_config,关于下面各个参数的含义请参考使用手册,此例中使用第二种认证方式(基于密钥的认证)以提高安全性。
# $OpenBSD: sshd_config,v 1.34 2001/02/24 10:37:26 deraadt Exp $
Port 22
#Protocol 2,1
#ListenAddress 0.0.0.0
#ListenAddress ::
HostKey /etc/ssh/ssh_host_key
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key
ServerKeyBits 768
LoginGraceTime 600
KeyRegenerationInterval 3600
PermitRootLOGin without-password
#
# Don't read ~/.rhosts and ~/.shosts files
IgnoreRhosts yes
# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
#IgnoreUserKnownHosts yes
StrictModes yes
X11Forwarding no
X11DisplayOffset 10
PrintMotd yes
KeepAlive yes

# Logging
SyslogFacility AUTH
LogLevel INFO
#obsoletes QuietMode and FascistLogging

RhostsAuthentication no
#
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
RhostsRSAAuthentication no
#
RSAAuthentication yes

# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication no
PermitEmptyPasswords no

# Comment to enable s/key passwords or PAM interactive authentication
# NB. Neither of these are compiled in by default. Please read the
# notes in the sshd(8) manpage before enabling this on a PAM system.
ChallengeResponseAuthentication no

# To change Kerberos options
#KerberosAuthentication no
#KerberosOrLocalpasswd yes
#AFSTokenPassing no
#KerberosTicketCleanup no

# Kerberos TGT Passing does only work with the AFS kaserver
#KerberosTgtPassing yes

#CheckMail yes
#UseLogin no

#MaxStartups 10:30:60
#Banner /etc/issue.net
#reverSEMappingCheck yes

#Subsystem sftp /usr/libexec/sftp-server

六、 生成认证密钥
当采用密钥认证方式时,第个用户在远程服务器上必须生成自己的密钥;下面我们就以实例的方式叙述此过程:
6.1 为服务器上的用户robin生成rsa1认证密钥:
[root@mail tmp]su robin
[root@mail tmp]ssh-keygen
此命令运行时将会提示你密钥的存放位置,直接回车;在提示你输入passphrase时建议你输入一个不短于10个字符的英文句子,以止你的私有密钥被别人盗用。它会在当前用户的个人目录个生成两个文件:
~/.ssh/identify robin的私有密钥
~./ssh/identify.pub robin的公用密钥
6.2 不要忘记idnentify.pub更名:
[root@mail .ssh]mv identify.pub authorized_keys
6.3 拷贝文件到安全的地方,在服务器上你的宿主文件夹中删除identify文件。
七、 使用PuTTY客户端登录
终于到检验我们工作结果的时候了,在WINDOWS平台的SSH客户端我推荐使用Putty,很好用,不像其它一些客户端只支持基于口令的安全验证;你可以在这里下载:
http://www.chiark.greenend.org.uk/~sgtatham/putty.htML
在连接服务器时不要忘记在connect->SSH中指定你的私有密钥的存放位置,输入创建密钥时的passphrase,如果不出意外你就可以安全地行程控制你的服务器了。

脚本宝典总结

以上是脚本宝典为你收集整理的安装和配置OPENSSH全部内容,希望文章能够帮你解决安装和配置OPENSSH所遇到的问题。

如果觉得脚本宝典网站内容还不错,欢迎将脚本宝典推荐好友。

本图文内容来源于网友网络收集整理提供,作为学习参考使用,版权属于原作者。
如您有任何意见或建议可联系处理。小编QQ:384754419,请注明来意。
标签:"