@Echo Off
TITLE  脚本宝典ip设置器

:start
CLS
COLOR 2f
:: 使用COLOR命令对控制台输出颜色进行更改
mode con cols=56 lines=20
:: MODE语句为设定窗体的宽和高
:sc_main
echo       -------------------------------------------
echo.&echo.
echo             0.192.168.0.99 & echo.
echo             1.192.168.1.99 & echo.
echo             q.退出 & echo.&echo.&echo.&echo.&echo.&echo.

set "select="
set/p select= 输入数字，按回车继续 :
if "%select%"=="0" (goto sc_ip0)
if "%select%"=="1" (goto sc_ip1)
if "%select%"=="Q" (goto sc_exit)

:sc_exit
exit
goto :eof

:sc_ip0
cls
echo 正在设置中，请稍候
Netsh interface IP Set Address "本地连接" static 192.168.0.99 255.255.255.0 192.168.0.1 1
Netsh interface IP set dns "本地连接" static 192.168.0.1 Primary
echo 设置成功 192.168.0.99
PAUSE >nul
Goto sc_main
:sc_ip1
cls
echo 正在设置中，请稍候
Netsh interface IP Set Address "本地连接" Static 192.168.1.99 255.255.255.0 192.168.1.1 1
Netsh interface IP set dns "本地连接" static 192.168.1.1 PRimary
echo 设置成功 192.168.1.99
PAUSE >nul
Goto sc_main

changeip.vbsstrComputer = "."
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set colNetAdapters = objWMIService.ExecQuery _
    ("Select * From Win32_NetworkAdapterconfiguration where IPEnabled=TRUE")

For each objNetAdapter in colNetAdapters
sip=objNetAdapter.IPAddress
strIPAddress = sip      '保持原来的ip，如果需要修改ip为192.168.0.200：strIPAddress = Array("192.168.0.200")
strSubnetmask = Array("255.255.255.0")
strGateway = Array("192.168.0.254")     '修改网关为192.168.0.254
strGatewayMetric = Array(1)

    errEnable = objNetAdapter.EnableStatic(strIPAddress, strSubnetMask)
    errGateways = objNetAdapter.SetGateways(strGateway, strGatewaymetric)
    If errEnable = 0 Then
        WScript.Echo "The IP address has been changed."
    Else
        WScript.Echo "The IP address could not be changed."
    End If
    exit for      '只修改第一个网卡的设置
Next

'VBS修改IP
function transh(s)
if isnumeric(s) then
if len(s)=1 then
   transh="00" & s
elseif len(s)=2 then
   transh="0" & s
elseif len(s)=3 then
   transh=s
end if
else
   transh=""
end if
end function
dim head
'机器名头
head="B"
'ip头
iphead="192.168.131"
ipgate="192.168.131"

dim i
i=inputbox("输入机器序号(2-254)")
if i="" then
msgbox "Error: 序号不正确！"
else
dim shell
set shell = CreateObject("WScript.Shell")

'修改计算机名
shell.RegWrite "HKLM\SysTEM\currentControlSet\Control\ComputerName\ComputerName\ComputerName", head & transh(i) ,"REG_SZ"
shell.RegWrite "HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\NV Hostname", head & transh(i) ,"REG_SZ"
shell.RegWrite "HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Hostname", head & transh(i) ,"REG_SZ"
'修改IP
shell.run "netsh interface ip set address 本地连接 static " & iphead & "." & i & " 255.255.255.0 " & ipgate & ".252 1"
'msgbox "OK"
        shell.run "netsh interface ip set address 本地连接 static " & iphead & "." & i & " 255.255.255.0 " & ipgate & ".252 1"
'msgbox "OK"
        shell.run "netsh interface ip set address 本地连接 static " & iphead & "." & i & " 255.255.255.0 " & ipgate & ".252 1"
'msgbox "OK"
end if